Co2 G Mix for Guinness Beer

Instead of CO2 like a traditional draft beer system, Guinness uses a nitrogen/CO2 blend to push the beer through the lines. Mixed gas comes in an all-in-one air tank that contains 75% nitrogen and 25% CO2.

The nitrogen gives Guinness its creamy tight head that makes it so unique. To find a dealer in your area look no further. For more info visit : http://www.kenmarfire.com/co2-g-mix-for-guinness-beer/

Beverage CO2 Recharge Tanks

We sell only “beverage grade” co2, which means it has been tested to meet an FDA mandated 99.9% purity level. It is crisp, clean, and bright. It leaves no bad odors or bad tastes in your beer. It will not cause headaches which can be due to small amounts of contaminates such as benzene or other hydrocarbons.

Industrial co2 from welding shops and other sources are not usually tested to these high purity standards. Great beer deserves high quality co2! We have the equipment to do a co2 fill while you wait. For more info visit : http://www.kenmarfire.com/products/beverage-co2-recharge/

Argon with Co2 Mix Refill

We sell only “beverage grade” co2, which means it has been tested to meet an FDA mandated 99.9% purity level. It is crisp, clean, and bright. It has bad odors or  bad tastes in your beer. It will not cause headaches which can be due to amounts contaminates such as benzene or other hydrocarbons.

Industrial co2 from welding shops and other sources is not usually tested to these high purity standards. Great beer deserves high quality co2! We have the equipment to do a co2 fill while you wait. Read more.. http://www.kenmarfire.com/argon-with-co2-mix-refill/

Oxygen For Welding Refills

In oxy-fuel welding, a welding torch is used to weld metals. Welding metal results when two pieces are heated to a temperature that produces a shared pool of molten metal. The molten pool is generally supplied with additional metal called filler. Filler material depends upon the metals to be welded,Oxy-fuel is one of the oldest welding processes, besides forge welding.

Still used in industry, in recent decades it has been less widely utilized in industrial applications as other specifically devised technologies have been adopted. It is still widely used for welding pipes and tubes, as well as repair work. For more info visit : http://www.kenmarfire.com/oxygen-for-welding-refills/

Compressed Nitrogen

At normal atmospheric conditions, nitrogen is a gas unless the temperature is at or below -320 degrees Fahrenheit. Because that temperature is prohibitively expensive to maintain, not to mention harmful for other objects in the room, the best way to convert nitrogen into a liquid form is to compress it, applying such pressure to it that it condenses. For more info visit : http://www.kenmarfire.com/compressed-nitrogen/

Argon Gas Refills

Argon is one of the most abundant rare gases. Argon makes up roughly 1 percent of the Earth’s atmosphere. This gas is non-toxic. Argon is used in a variety of products, especially in the semiconductor industry.

It also plays a major role in welding. Argon is popular as an inert gas because it has very low reactivity. Owners must store the gas in cylinders until they’re ready to use them. For more info regarding Fire Extinguisher  refill new york visit : http://www.kenmarfire.com/argon-gas-refills/

Class D Dry Powder

Suitable for use on metal fires, the Class D dry powder fire extinguisher is designed to be as safe as it is effective.

Class D Dry Powder employs the use of a soft flow extension applicator to ensure that hands are kept away from extreme heat and to prevent the inhalation of toxic fumes from burning metal. Model WB570 is approved for fires involving magnesium, sodium (spills and in depth), potassium, and sodium potassium alloys.

Features Include:
Unique soft flow extension applicator with built in long-range nozzle
Applicator can be quickly detached to provide a straight stream of powder; where greater range is needed, a narrow discharge pattern or lobbing effect is required
Heavy duty steel cylinder
Corrosion resistant paint finish
FM approved
Operating temperature -40°F to +120°F

For more info regarding Fire Extinguisher sales visit : http://www.kenmarfire.com/products/class-d-dry-powder/

Universal Ultra AR-AFFF Foam Extinguishers

Foam fire extinguishers are designed for use on Class A fires (common combustibles), as well as hydrocarbon and polar solvent types of Class B flammable liquids.

Foam fire extinguishers contain an alcohol resistant (AR) type of aqueous film-forming foam (AFFF). Specifically formulated for use in hand-portable cylinders, it has a vapor sealing capability that can actually keep a fire from happening when sufficiently applied. The odorless foam is non-toxic, environmentally friendly, biodegradable, easy to use, and easy to clean up.

They are ideal almost anywhere, including gas stations, warehouses, construction sites, fuel handling areas, print shops, laboratories, and manufacturing facilities. For more info regarding Fire Extinguisher sales visit : http://www.kenmarfire.com/products/universal-ultra-ar-afff-foam-extinguishers/